Service Area
Garage floor coatings in Onalaska, WI
We install full-flake epoxy and polyurea garage floors in Onalaska, Holmen and the neighborhoods along the north side of the La Crosse area.
La Crosse County
What we see on Onalaska slabs
Onalaska has a lot of newer housing, and newer housing means newer slabs — usually sound, usually flat, and usually still bare. Those are the easiest floors we coat, because the preparation is grinding rather than repair. It also means a lot of attached, heated three-stall garages, which is the one situation where you genuinely have a free choice between the two systems rather than a clear answer.
Between the subdivisions and Lake Onalaska, a good share of these garages are storing boats, kayaks and river gear alongside the vehicles. That is wet equipment coming in and out all summer, and it is exactly what a sealed floor handles better than bare concrete.
Onalaska, Holmen and the north side of the La Crosse area. We quote every floor on site, because the only honest way to price a slab is to stand on it.
- French Island
- Midway
Don't see your town? Call (608) 980-3843 and we'll tell you straight whether you're in range.
What We Install
Which system suits Onalaska
We install full-flake epoxy and full-flake polyurea and we don't have a house favorite. What tips it one way or the other is usually local.
Attached and heated is the norm here, so epoxy is a genuine option and often the more economical one. Polyurea still wins if the garage is detached or unheated, or if you want the space back sooner.
Full comparison of epoxy vs. polyurea garage floor systems, or read the garage floor coating FAQ.
Onalaska Questions
What people ask us in Onalaska
My garage is only a few years old. Is it worth coating?
It is the best time to do it. A newer slab has not had years of salt and moisture working into it, so preparation is straightforward and the coating goes onto sound concrete. Coating it now is what stops the pitting and staining from starting.
Do you cover Holmen too?
Yes. Holmen, French Island and Midway are all on the same run for us, along with Onalaska itself.
Can you handle a three-stall garage?
Yes. Larger floors are quoted the same way as small ones — on square footage and the condition of the slab. The preparation, crack and joint work is inside the number rather than added on top.
What does a garage floor coating cost in Onalaska?
Epoxy is $5 to $7 per square foot and polyurea $6 to $9, preparation included. Onalaska slabs tend to be newer and sound, which means the prep is grinding rather than repair — that usually puts a floor here at the friendlier end of the range.
The garage holds the boat and river gear. Will it stand up to that?
That is a good use for it. Flake broadcast to refusal under a clear topcoat gives a surface built for gear rather than foot traffic, and wet equipment dries on it instead of soaking into it. Put something under trailer jacks and stands, though — concentrated point loads mark any floor, coated or bare.
More general questions on cost, prep and timelines are in the full FAQ.
Free quotes across Onalaska
We come to you, look at the actual slab, and put a written number in your hands. No pressure, no sales script.
We also serve La Crosse, Eau Claire, Madison, Wisconsin Dells, Castle Rock Lake, Mauston, Tomah, Sparta, Baraboo, Viroqua, Westby, Cashton, West Salem, Holmen, Middleton, Sun Prairie, Reedsburg, Elroy, La Valle, Hillsboro, Warrens, Necedah, Adams, Portage, Mount Horeb and Waunakee.