Skip to content
Timberline Epoxy

Service Area

Garage floor coatings in La Crosse, WI

We install full-flake epoxy and polyurea garage floors across La Crosse and the Coulee Region — from the bluffs down to the river flats.

La Crosse County

What we see on La Crosse slabs

Garages here take a particular kind of beating. Bluff-side driveways mean salt and sand get tracked in all winter, and the humidity coming off the Mississippi keeps slabs damp well into spring. Moisture moving up through concrete is one of the real causes of coating failure, so it's something we check for before recommending a system rather than after.

The housing stock skews older here — plenty of detached garages behind established homes, alongside newer builds out through Onalaska and Holmen. An older slab isn't a problem in itself. What matters is whether the concrete is sound underneath, and surface staining comes off in the grind anyway.

The Coulee Region and the Mississippi river valley. We quote every floor on site, because the only honest way to price a slab is to stand on it.

Also serving near La Crosse

Don't see your town? Call (608) 980-3843 and we'll tell you straight whether you're in range.

What We Install

Which system suits La Crosse

We install full-flake epoxy and full-flake polyurea and we don't have a house favorite. What tips it one way or the other is usually local.

Moisture decides more here than anywhere else we work. Where a slab reads dry, epoxy's thickness is usually the better value. Where it doesn't, we'll be talking about a moisture seal before we talk about which resin goes down.

La Crosse Questions

What people ask us in La Crosse

Do you cover Onalaska, Holmen and the rest of the Coulee Region?

Yes — Onalaska, Holmen, West Salem, Sparta, Tomah and Viroqua are all regular ground for us, along with La Crosse itself. If your town isn't on that list, call and ask. The answer is usually yes.

My garage floor is old and badly stained. Is it too far gone to coat?

Staining almost never rules a floor out. Surface discoloration comes off in the diamond grinding, which every floor gets regardless. What matters is whether the slab is structurally sound underneath it. Deep spalling or concrete that's actively breaking up is a different conversation, and we'll tell you straight if that's what we find.

What does a garage floor coating cost in La Crosse?

Full-flake epoxy runs $5 to $7 per square foot and polyurea $6 to $9, with all the preparation inside that number rather than added on top. Where a floor lands in the range comes down to slab condition. In La Crosse the one thing that can add to it is a moisture seal, at fifty cents a square foot, and only where the slab actually tests wet.

How do you know whether my slab has a moisture problem?

We test rather than guess. Moisture moving up through concrete is one of the genuine causes of coating failure, and it is far more common down on the river flats than up on the bluffs. If a slab reads wet we will tell you before quoting a system, because the answer changes what goes down.

How long will my garage be out of use?

Longer than a day, and the exact figure depends on the weather that week — temperature changes cure times enough that a rule of thumb would be misleading. We give you real numbers for your floor at the walkthrough, and we would rather tell you it is three days than promise one and be wrong.

More general questions on cost, prep and timelines are in the full FAQ.

Call NowFree Quote